control instruments

英 [kənˈtrəʊl ˈɪnstrʊmənts] 美 [kənˈtroʊl ˈɪnstrəmənts]

网络  监控设施; 控制仪表

化学



双语例句

  1. A variety of detection, analysis, test and control instruments and software;
    各类检测、分析、测试、控制仪器及软件;
  2. There used to be few catastrophe risk control instruments for the insurance company to utilize.
    在过去,保险公司对自身承保的巨灾风险的控制手段不多。保险人通过再保险使自身免遭巨灾。
  3. General technical specifications for marine pneumatic measurement and control instruments
    GB/T10319-1988船舶用气动测量和控制仪表通用技术条件
  4. Pressure range and quality of air supply for the industrial process measurement and control instruments
    GB/T4830-1984工业自动化仪表气源压力范围和质量
  5. The design of SCPI parser module between PC and remote control instruments
    PC机远程控制仪器的SCPI解析模块设计
  6. PIC16F87X serial chip has simple instructions, powerful functions, and is widely applied in observing and control instruments, the field of low power dissipation.
    PIC16F87X系列单片机指令精简、功能强大,在测控仪器仪表和低功耗等场合得到广泛应用。
  7. The automobile active safety system was introduced, then the sensors and measured parameters were analyzed. The vehicular measurement and control technology and typical measurement and control instruments were proposed finally.
    首先介绍了汽车主动安全性系统,由此分析了汽车传感器及汽车性能测试的被测参数,最后阐述了满足新的汽车系统要求的汽车性能测控技术及典型测控系统。
  8. It has been successfully used for the personnel training and for the testing of reactor control instruments and experiment devices.
    应用该堆成功地进行了人员培训,堆控仪表和实验仪器考验,以及某些应用的预先研究。
  9. The embedded testing and control instruments with GUI are used widely.
    具有图形界面的嵌入式测控仪器正被越来越广泛地应用。
  10. This paper introduces a neutron diffractometer system with three detectors in which the microcomputer is applied to control Instruments, collect information and process data.
    本系统介绍了用微型计算机进行运行控制和信息采集及处理的三探头中子粉末衍射仪系统。
  11. A suit of CAN bus based on the existed intelligence control instruments is presented.
    介绍了利用现有控温仪表构建一套CAN总线系统。
  12. A universal computation platform for measurement& control instruments is designed in this paper, its hardware configuration is presented and some key software problems are discussed.
    本文介绍了一种面向测量与控制仪表的通用计算平台,给出了系统的硬件组成,讨论了软件编程的关键问题。
  13. It is especially applicable to the intelligent digital control instruments.
    本算法特别适用于智能化数字调节仪表。
  14. It provides two ways, instrument panel and direct I/ O, to control instruments.
    它具有软面板和直接输入输出两种方式,可用来对仪器进行控制操作。
  15. In accordance with the existing technique process and the situation of burden plant, the communication between various weighing and control instruments in this plant and computer is resolved. With VB as the programming tool, the acquisition, record and archiving of weighing data are implemented.
    根据现有配料装置的具体工艺过程和硬件配置情况,解决了计算机与该装置中各种称量控制仪表的通信问题,并以VB为编程工具,实现了对实际称量数据的采集、记录和存档。
  16. This paper introduces the latest development of fuzzy microprocessor and its developing tools; and also introduces the fuzzy technology based measuring and control instruments and meters, together with its process applications.
    本文介绍了模糊微处理器和开发工具的最新进展.以及采用模糊技术的测量、控制仪表产品和它们在工业现场的应用。
  17. It can be used in the secondary development of control instruments effectively after being optimized and perfected.
    该平台经过完善与优化,可有效用作控制仪表的二次丌发。
  18. The working principle and the selection rule for the automatic control instruments, such as remote valve, ammonia discharge valve and the valve positioner were introduced.
    介绍了自控仪表的附件&遥控阀、放氨阀、阀门定位器的工作原理和选型原则。
  19. The general platform of the embedded industry controller based on ARM and μ C/ OS-ⅱ is conceived and exploited facing to the industry control field in this paper. It is point to the developing requirements of the intellectualized and the network industry control instruments.
    本文针对工业控制仪器仪表智能化和网络化的发展需求,面向工业控制领域构建和开发基于ARM和μC/OS-Ⅱ的嵌入式工业控制器的通用平台。
  20. Research of Several Serial Bus and Application Selection Guide for Measurement& Control Instruments
    几种可用于测控仪器的串行总线研究和应用选择原则
  21. The electron-pneumatic inverter is the main accessory of the pneumatic actuator and is the indispensable key equipment in the automatic industrial production. It's used to achieve the information conversion and the energy conversion in the automatic control instruments and systems.
    电&气转换器是气动执行器的主要附件,在自控仪表和自控系统中实现信息转换和能量转换,是自动化生产过程中不可或缺的关键设备。
  22. Further, accomplish the design of field measure and control instruments for anti-surge control system of compressor, complete the design of interlock logic diagram and the design of anti-surge control logic.
    然后完成了压缩机防喘振控制系统现场检测和控制仪表设计、联锁逻辑设计和防喘振控制逻辑设计。
  23. Currently, the core control algorithm of control instruments for industrial mostly uses the PID algorithm.
    目前,工业上使用的控制仪表其核心控制算法大多仍然是PID算法。
  24. With the development of electronic technology and communication technology, monitoring and control instruments have been gradually automated and intelligent. Also the development of semiconductor technology and SOC technology provides a new program to the intelligent instrument design.
    随着电子技术和通信技术的发展,监测控制仪表也逐步实现了自动化,智能化,其中半导体技术和SOC技术的发展为智能仪表的设计提供了新的方案。
  25. The function of every hardware structures is analyzed. The function principles of sensor and control instruments are mainly introduced.
    本文以乳化炸药生产线油水相流量控制系统为研究对象,分析了各硬件结构的功能,并主要介绍了传感器,控制仪表的功能原理。
  26. Networked Measurement and Control Instruments is the core of the network-based measurement and control system that composed of the basic unit of measurement and control system, and is the physical basis of data acquisition and controlling.
    网络化测控仪器是网络化测控系统的核心,是组成测控系统的基本单位,是进行数据采集和测控的物理基础。
  27. Morality, religion and law as the social control instruments are the solutions to environmental problems.
    作为社会控制工具的道德、宗教和法律都是因应环境问题的策略。